Our product's categories / integrations

By-the-line or lab control stations, industrial machines, in-line integrations... Find among the multiple possible integrations of Enovasense sensors, the one that match your need.

1000 mm Control station with 3 axes / Ref. INT01-CS1000-3AX / Status: available

This control station can be used for measuring medium size parts by the line or in lab.

This design is suited for operator use with manual loading of medium size parts and automated scanning. The system can measure automatically multiple locations set by the operator in the beginning.

  • Easy to use
  • 3 axes scanning of the part
  • Simple IHM and display of the measurements
  • Touch screen
  • Automated sliding door
  • Simple save of the measurements (with part or lot name reference)
  • Simple output of the measurement (csv, txt formats or other industrial communication protocols)
  • No laser danger for users: follows the specifications of IEC60825 as a Class 1 laser device
  • Special laser safe window for following the measurement sequence
Moving line fixture of XXmm width with transversal moving axis / Ref. INT02-MLXX-MA1 / Status: available

This moving line fixture allows to measure parts moving horizontally with a certain speed.

This allows to measure regular points along the produced parts allowing a 100% following of the production situation.

The axis allows to measure at different widths positions on the part.

  • Completely automated design
  • Special harsh environment protection of the measuring head and the command box
  • Regular automated calibration check in position zero in the head protection box
  • Dust-isolated and temperature regulated electrical cabinet for the command box and axis controller
  • Simple IHM and display of the measurements
  • Simple saving of the measurements (with reference name of the part or of the lot)
  • Simple output of the measurement (csv, txt formats or other industrial communication protocols)
460 mm Control station / Ref. INT01-CS460 / Status: available

This control station can be used for measuring small size parts by the line or in lab.

The parts are manually placed by an operator into the control station. The Enovasense command box is under the measurement zone and the measurement is monitored through a separated laptop PC.

  • Easy to use
  • No laser danger for users: follows the specifications of IEC60825 as a Class 1 laser device
  • Special laser safe window for following the measurement sequence

Products